Wiring of Solar Powered Timer Controlled Motorized Valves
Connect the solar panel to the timer control unit as per the wiring instructions.
Set the desired ON/OFF time on the timer to control when the valve should open or close.
Connect the motorized valve to the output terminals of the timer.
The valve will automatically operate based on the timer settings—no manual intervention or external power needed.
- Connect to the GND of the Solar Panel (black wire)
- Connect to the Positive terminal of the Solar Panel (red wire)
- No connection required
- Connect to the GND of the Motorized Valve (black wire)
- Connect to the Positive terminal of the Motorized Valve (red wire)
- Connect to the Trigger wire of the Motorized Valve (green wire)
⚠️ Important:
Avoid shorting the terminals or wires, as it may result in damage to the battery.
- Do not alter the solar charge settings.
- Turn off the ON/OFF toggle switch when the system is not in use.
- To manually override the motorized valve, first switch off the output power from the panel.
Still can’t find an answer?
Send us a ticket and we will get back to you.
Follow our Social Channels