Documentations

SA504 220V AC Modulating circuit uses Analog Input of 0-10V DC Signal for percentage wise opening and closing of the motorized valves.

SA202 24V DC is a 2 wire DC wiring which is very similiar to the functioning of a solenoid valve. It is used in smaller size of Sensoware Electric Operated Ball Valves.

SA503 220V AC Modulating circuit uses Analog Input of 4-20mA Signal for percentage wise opening and closing of the motorized valves.

SA408 is a basic 12V DC Modulating Motorized Valve wiring. The analog input signal is 0 to 10V DC

SA603 12V DC wiring is a Modulating Circuit for Motorized Valves of any size or material options. It is operated by analog input signal of 4 to 20mA and also it gives feedback output in 4-20mA signal.

SA407 is a basic 24V DC Modulating Motorized Valve wiring. The analog input signal is 0 to 10V DC

SA802 is the 8 Wire 220V AC floating type Circuit to operate the motorized valves 220V AC.

SA404 is the 4 Wire 220V AC Basic Electrical Circuit to operate the motorized valves 220V AC ON/OFF.